bingshuo/guanghulab
1
0
Fork 0
Code Issues 2 Pull Requests Actions 1 Packages Projects Releases Wiki Activity
guanghulab/server/proxy/deploy-brain-proxy.sh

904 lines
35 KiB
Bash
Raw Normal View History

光湖搬家·国内初始化 · 2026-05-10
2026-05-10 13:12:44 +08:00
#!/bin/bash
# ═══════════════════════════════════════════════
# 🔺 Sovereign: TCS-0002∞ | Root: SYS-GLW-0001
# 📜 Copyright: 国作登字-2026-A-00037559
# ═══════════════════════════════════════════════
# server/proxy/deploy-brain-proxy.sh
# 🚀 铸渊专线V2 + 光湖语言世界V3 · 大脑服务器部署脚本
#
# 在大脑服务器(ZY-SVR-005)上执行
# 部署多用户VPN系统 (独立于面孔服务器的V1)
#
# 用法:
# bash deploy-brain-proxy.sh install — 首次安装
# bash deploy-brain-proxy.sh update — 更新代码
# bash deploy-brain-proxy.sh status — 检查状态
# bash deploy-brain-proxy.sh restart — 重启服务
# bash deploy-brain-proxy.sh add-user <email> [quota_gb] — 添加用户
# bash deploy-brain-proxy.sh remove-user <email> — 移除用户
# bash deploy-brain-proxy.sh list-users — 列出用户
# bash deploy-brain-proxy.sh deploy-v3 — 部署V3生产环境
# bash deploy-brain-proxy.sh switch-v3 — 切换V2→V3 (用户刷新即升级)
# ═══════════════════════════════════════════════
set -uo pipefail
PROXY_DIR="/opt/zhuyuan-brain/proxy"
NGINX_BACKUP_DIR="/opt/zhuyuan-brain/nginx-backups"
REPO_PROXY_DIR="$(dirname "$0")"
ACTION="${1:-status}"
echo "════════════════════════════════════════"
echo "🌐 铸渊专线V2 · 大脑服务器部署 · action=$ACTION"
echo "════════════════════════════════════════"
# ── 共用: 确保Xray以root运行 ──
ensure_xray_root_user() {
if [ ! -f /etc/systemd/system/xray.service.d/override.conf ]; then
mkdir -p /etc/systemd/system/xray.service.d
cat > /etc/systemd/system/xray.service.d/override.conf <<EOF
[Service]
User=root
EOF
systemctl daemon-reload
echo " ✅ Xray服务已配置为root用户运行"
fi
}
# ── install: 首次完整安装 ─────────────────────
install() {
echo ""
echo "═══ [1/8] 安装Xray-core + BBR ═══"
bash "$REPO_PROXY_DIR/setup/install-xray.sh"
echo ""
echo "═══ [2/8] 创建V2目录结构 ═══"
mkdir -p "$PROXY_DIR"/{config,data,logs,service}
echo ""
echo "═══ [3/8] 生成V2密钥 ═══"
generate_v2_keys
echo ""
echo "═══ [4/8] 部署V2服务代码 ═══"
deploy_services
echo ""
echo "═══ [5/8] 配置Xray ═══"
ensure_xray_root_user
mkdir -p "$PROXY_DIR/logs"
chmod 755 "$PROXY_DIR/logs"
# Xray配置由user-manager动态生成，初始为空用户
node "$PROXY_DIR/service/user-manager.js" rebuild 2>/dev/null || {
echo " ⚠️ 初始Xray配置为空(无用户)，添加用户后自动生成"
}
systemctl enable xray
systemctl restart xray 2>/dev/null || true
sleep 2
echo ""
echo "═══ [6/8] 配置Nginx反向代理 ═══"
configure_nginx
echo ""
echo "═══ [7/8] 启动PM2服务 ═══"
start_pm2_services
echo ""
echo "═══ [8/8] 健康检查 ═══"
health_check
echo ""
echo "════════════════════════════════════════"
echo "✅ 铸渊专线V2安装完成 (大脑服务器)"
echo ""
echo "下一步:"
echo " 1. 将生成的密钥添加到GitHub Secrets"
echo " 2. 添加用户: bash deploy-brain-proxy.sh add-user <email>"
echo " 3. 配置腾讯云防火墙: 开放443端口"
echo "════════════════════════════════════════"
}
# ── 生成V2独立密钥 ────────────────────────────
generate_v2_keys() {
KEYS_FILE="$PROXY_DIR/.env.keys"
# 如果已有密钥文件，跳过
if [ -f "$KEYS_FILE" ] && grep -q "ZY_PROXY_REALITY_PRIVATE_KEY" "$KEYS_FILE" 2>/dev/null; then
echo " 密钥文件已存在，跳过生成"
return
fi
echo " 生成V2独立密钥..."
# Reality密钥对
PRIVATE_KEY=""
PUBLIC_KEY=""
if command -v xray &>/dev/null; then
KEYS_OUTPUT=$(xray x25519 2>&1)
PRIVATE_KEY=$(echo "$KEYS_OUTPUT" | grep -i "private" | awk '{print $NF}') || true
PUBLIC_KEY=$(echo "$KEYS_OUTPUT" | grep -i "public" | awk '{print $NF}') || true
fi
if [ -z "$PRIVATE_KEY" ] && command -v openssl &>/dev/null; then
TMPKEY=$(mktemp)
if openssl genpkey -algorithm X25519 -out "$TMPKEY" 2>/dev/null; then
PRIVATE_KEY=$(openssl pkey -in "$TMPKEY" -outform DER 2>/dev/null | tail -c 32 | base64 | tr '+/' '-_' | tr -d '=')
PUBLIC_KEY=$(openssl pkey -in "$TMPKEY" -pubout -outform DER 2>/dev/null | tail -c 32 | base64 | tr '+/' '-_' | tr -d '=')
fi
rm -f "$TMPKEY"
fi
if [ -z "$PRIVATE_KEY" ]; then
echo " ❌ 无法生成X25519密钥"
exit 1
fi
SHORT_ID=$(openssl rand -hex 8)
cat > "$KEYS_FILE" <<EOF
# 铸渊专线V2密钥 · 大脑服务器 · 自动生成 · $(date -u +"%Y-%m-%dT%H:%M:%SZ")
# ⚠️ 仅root可读 · 不可提交到仓库
# ⚠️ V2密钥独立于V1 · 两套VPN互不影响
ZY_PROXY_REALITY_PRIVATE_KEY=$PRIVATE_KEY
ZY_PROXY_REALITY_PUBLIC_KEY=$PUBLIC_KEY
ZY_PROXY_REALITY_SHORT_ID=$SHORT_ID
EOF
# 保存服务器地址
if [ -n "${ZY_BRAIN_HOST:-}" ]; then
echo "ZY_BRAIN_HOST=${ZY_BRAIN_HOST}" >> "$KEYS_FILE"
elif [ -n "${ZY_SERVER_HOST:-}" ]; then
echo "ZY_SERVER_HOST=${ZY_SERVER_HOST}" >> "$KEYS_FILE"
fi
# 保存面孔服务器节点信息 (多节点智能选路)
if [ -n "${ZY_FACE_HOST:-}" ]; then
echo "" >> "$KEYS_FILE"
echo "# 面孔服务器节点 (ZY-SVR-002 · SG2 · 多节点智能选路)" >> "$KEYS_FILE"
echo "ZY_FACE_HOST=${ZY_FACE_HOST}" >> "$KEYS_FILE"
fi
if [ -n "${ZY_FACE_REALITY_PUBLIC_KEY:-}" ]; then
echo "ZY_FACE_REALITY_PUBLIC_KEY=${ZY_FACE_REALITY_PUBLIC_KEY}" >> "$KEYS_FILE"
fi
if [ -n "${ZY_FACE_REALITY_SHORT_ID:-}" ]; then
echo "ZY_FACE_REALITY_SHORT_ID=${ZY_FACE_REALITY_SHORT_ID}" >> "$KEYS_FILE"
fi
# 保存CN中转节点信息
if [ -n "${ZY_CN_RELAY_HOST:-}" ]; then
echo "" >> "$KEYS_FILE"
echo "# CN中转节点 (国内→SG · 低延迟)" >> "$KEYS_FILE"
echo "ZY_CN_RELAY_HOST=${ZY_CN_RELAY_HOST}" >> "$KEYS_FILE"
echo "ZY_CN_RELAY_PORT=${ZY_CN_RELAY_PORT:-2053}" >> "$KEYS_FILE"
fi
# 保存硅谷服务器节点信息 (Claude专线 · 美国IP出口)
# D61: 冰朔已配置硅谷服务器，新增Claude单独访问VPN节点
if [ -n "${ZY_SVR_SV_HOST:-}" ] && [ -n "${ZY_SVR_SV_REALITY_PUBLIC_KEY:-}" ]; then
echo "" >> "$KEYS_FILE"
echo "# 硅谷服务器节点 (ZY-SVR-SV · Claude专线 · 美国IP出口)" >> "$KEYS_FILE"
echo "ZY_SVR_SV_HOST=${ZY_SVR_SV_HOST}" >> "$KEYS_FILE"
echo "ZY_SVR_SV_REALITY_PUBLIC_KEY=${ZY_SVR_SV_REALITY_PUBLIC_KEY}" >> "$KEYS_FILE"
echo "ZY_SVR_SV_REALITY_SHORT_ID=${ZY_SVR_SV_REALITY_SHORT_ID:-}" >> "$KEYS_FILE"
echo "ZY_SVR_SV_PORT=${ZY_SVR_SV_PORT:-443}" >> "$KEYS_FILE"
fi
# 保存SMTP邮件凭据 (带宽共享验证码·邮件通知)
if [ -n "${ZY_SMTP_USER:-}" ] && [ -n "${ZY_SMTP_PASS:-}" ]; then
echo "" >> "$KEYS_FILE"
echo "# SMTP邮件凭据 (带宽共享验证码·邮件通知)" >> "$KEYS_FILE"
echo "ZY_SMTP_USER=${ZY_SMTP_USER}" >> "$KEYS_FILE"
echo "ZY_SMTP_PASS=${ZY_SMTP_PASS}" >> "$KEYS_FILE"
fi
chmod 600 "$KEYS_FILE"
echo ""
echo " ══════════ V2密钥已生成 ══════════"
echo " ⚠️ 密钥已保存到: $KEYS_FILE (权限600·仅root可读)"
echo " ⚠️ 如需查看密钥，请SSH到服务器执行: cat $KEYS_FILE"
echo " ⚠️ 部署完成后，将公钥和ShortID添加到GitHub Secrets:"
echo " ZY_BRAIN_PROXY_REALITY_PUBLIC_KEY"
echo " ZY_BRAIN_PROXY_REALITY_SHORT_ID"
echo " ═══════════════════════════════════"
}
# ── 注入SMTP邮件凭据到.env.keys ──────────────
# 如果环境变量中有SMTP凭据且.env.keys中没有，自动追加
inject_smtp_credentials() {
local KEYS_FILE="$PROXY_DIR/.env.keys"
if [ ! -f "$KEYS_FILE" ]; then
echo " ⚠️ .env.keys不存在，跳过SMTP注入"
return
fi
if [ -z "${ZY_SMTP_USER:-}" ] || [ -z "${ZY_SMTP_PASS:-}" ]; then
echo " ℹ️ ZY_SMTP_USER/ZY_SMTP_PASS未提供，跳过SMTP注入"
return
fi
# 如果.env.keys已有SMTP配置，更新之
if grep -q "ZY_SMTP_USER" "$KEYS_FILE" 2>/dev/null; then
# 移除旧的SMTP行并重新追加
sed -i '/^ZY_SMTP_USER=/d' "$KEYS_FILE"
sed -i '/^ZY_SMTP_PASS=/d' "$KEYS_FILE"
sed -i '/^# SMTP邮件凭据/d' "$KEYS_FILE"
fi
echo "" >> "$KEYS_FILE"
echo "# SMTP邮件凭据 (带宽共享验证码·邮件通知)" >> "$KEYS_FILE"
echo "ZY_SMTP_USER=${ZY_SMTP_USER}" >> "$KEYS_FILE"
echo "ZY_SMTP_PASS=${ZY_SMTP_PASS}" >> "$KEYS_FILE"
chmod 600 "$KEYS_FILE"
echo " ✅ SMTP凭据已注入到 .env.keys"
}
# ── 部署V2服务代码 ────────────────────────────
deploy_services() {
mkdir -p "$PROXY_DIR"/{service,data,logs,config}
# 复制V2服务文件
cp "$REPO_PROXY_DIR"/service/user-manager.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/subscription-server-v2.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/traffic-monitor-v2.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/zy-cloud-vpn.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/vpn-worker.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/ecosystem.brain-proxy.config.js "$PROXY_DIR/"
# 复制V3服务文件 (独立运行·不影响V2)
cp "$REPO_PROXY_DIR"/service/subscription-server-v3.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/llm-router.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/reverse-boost-agent.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/service/proxy-guardian.js "$PROXY_DIR/service/"
cp "$REPO_PROXY_DIR"/ecosystem.brain-proxy-v3.config.js "$PROXY_DIR/"
# 复制∞版本服务文件 (邮件·带宽共享·守护·自动进化)
cp "$REPO_PROXY_DIR"/service/email-hub.js "$PROXY_DIR/service/" 2>/dev/null || true
cp "$REPO_PROXY_DIR"/service/bandwidth-pool-agent.js "$PROXY_DIR/service/" 2>/dev/null || true
cp "$REPO_PROXY_DIR"/service/user-guardian-agent.js "$PROXY_DIR/service/" 2>/dev/null || true
cp "$REPO_PROXY_DIR"/service/auto-evolution.js "$PROXY_DIR/service/" 2>/dev/null || true
# 复制V2 Nginx配置参考
cp "$REPO_PROXY_DIR"/config/nginx-brain-proxy-snippet.conf "$PROXY_DIR/config/" 2>/dev/null || true
cp "$REPO_PROXY_DIR"/config/nginx-brain-proxy-v3-snippet.conf "$PROXY_DIR/config/" 2>/dev/null || true
# 复制共用文件(发邮件等)
cp "$REPO_PROXY_DIR"/service/send-subscription.js "$PROXY_DIR/service/" 2>/dev/null || true
echo "✅ V2服务代码已部署到 $PROXY_DIR"
}
# ── 启动PM2服务 ───────────────────────────────
start_pm2_services() {
cd "$PROXY_DIR" || { echo "❌ 无法进入 $PROXY_DIR"; return 1; }
# 加载密钥作为环境变量
if [ -f "$PROXY_DIR/.env.keys" ]; then
set -a
# shellcheck source=/dev/null
source "$PROXY_DIR/.env.keys"
set +a
fi
pm2 startOrRestart ecosystem.brain-proxy.config.js --update-env
pm2 save
echo "✅ V2 PM2服务已就绪"
pm2 list
}
# ── 配置Nginx反向代理 (V2·端口3803) ──────────
configure_nginx() {
# 安装Nginx (如果未安装)
if ! command -v nginx &>/dev/null; then
echo " 安装Nginx..."
if apt-get update -qq && apt-get install -y nginx 2>&1 | tail -5; then
systemctl enable nginx
echo " ✅ Nginx已安装"
else
echo " ❌ Nginx安装失败"
return 1
fi
fi
# 查找Nginx配置文件
NGINX_CONF=""
for candidate in /etc/nginx/sites-enabled/zhuyuan-brain.conf /etc/nginx/sites-enabled/default; do
if [ -f "$candidate" ]; then
NGINX_CONF="$candidate"
break
fi
done
# 如果没有配置文件，创建大脑服务器专用配置
if [ -z "$NGINX_CONF" ]; then
NGINX_CONF="/etc/nginx/sites-enabled/zhuyuan-brain.conf"
echo " 创建大脑服务器Nginx配置..."
cat > "$NGINX_CONF" <<'NGINXEOF'
server {
listen 80 default_server;
server_name localhost 127.0.0.1;
# ─── 铸渊专线V2订阅服务 (端口 3803) ───
location /api/proxy-v2/ {
proxy_pass http://127.0.0.1:3803/;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_connect_timeout 10s;
proxy_read_timeout 30s;
proxy_send_timeout 30s;
add_header X-Content-Type-Options nosniff always;
add_header X-Frame-Options DENY always;
add_header Cache-Control "no-store, no-cache, must-revalidate" always;
}
# ─── 健康探针 ───
location = /health {
return 200 '{"status":"ok","server":"ZY-SVR-005-brain"}';
add_header Content-Type application/json;
}
}
NGINXEOF
# 移除默认配置避免冲突
if [ -f /etc/nginx/sites-enabled/default ] && [ "$NGINX_CONF" != "/etc/nginx/sites-enabled/default" ]; then
rm -f /etc/nginx/sites-enabled/default
echo " ✅ 已移除冲突的default配置"
fi
echo " ✅ 已创建大脑服务器Nginx配置"
else
echo " 使用现有Nginx配置: $NGINX_CONF"
# 修复端口错误: 如果存在3802端口配置，替换为3803
if grep -q "proxy_pass.*127\.0\.0\.1:3802" "$NGINX_CONF" 2>/dev/null; then
sed -i 's|proxy_pass[[:space:]]*http://127\.0\.0\.1:3802|proxy_pass http://127.0.0.1:3803|g' "$NGINX_CONF"
echo " ✅ 已修复端口: 3802 → 3803"
fi
# 修复路径错误: 如果V2配置仍使用旧的 /api/proxy-sub/ 路径，替换为 /api/proxy-v2/
if grep -q "location.*/api/proxy-sub/" "$NGINX_CONF" 2>/dev/null && grep -q "127\.0\.0\.1:3803" "$NGINX_CONF" 2>/dev/null; then
sed -i 's|location /api/proxy-sub/|location /api/proxy-v2/|g' "$NGINX_CONF"
echo " ✅ 已修复V2路径: /api/proxy-sub/ → /api/proxy-v2/"
fi
# 如果没有proxy-v2配置，注入V2配置
if ! grep -q "proxy-v2" "$NGINX_CONF" 2>/dev/null; then
echo " 添加V2订阅服务反向代理配置..."
# 在server块内的最后一个location之后、server块结束}之前插入
# 使用更安全的锚点: 匹配server块内的 } (缩进的)
sed -i '/^[[:space:]]*location/,/^[[:space:]]*}/ {
# 找到最后一个location块结束后的位置
}' "$NGINX_CONF" 2>/dev/null || true
# 使用perl进行更安全的插入（在server块的最后一个}之前）
if command -v perl &>/dev/null; then
perl -i -0pe 's/(server\s*\{(?:(?!server\s*\{).)*?)(^\})/\1 # ─── 铸渊专线V2订阅服务 (端口 3803) ───\n location \/api\/proxy-v2\/ {\n proxy_pass http:\/\/127.0.0.1:3803\/;\n proxy_http_version 1.1;\n proxy_set_header Host \$host;\n proxy_set_header X-Real-IP \$remote_addr;\n proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;\n proxy_set_header X-Forwarded-Proto \$scheme;\n proxy_connect_timeout 10s;\n proxy_read_timeout 30s;\n proxy_send_timeout 30s;\n add_header X-Content-Type-Options nosniff always;\n add_header X-Frame-Options DENY always;\n add_header Cache-Control "no-store, no-cache, must-revalidate" always;\n }\n\n\2/ms' "$NGINX_CONF" 2>/dev/null
else
# 回退: 在第一个顶层 } 之前插入
sed -i '/^}/i\
# ─── 铸渊专线V2订阅服务 (端口 3803) ───\
location /api/proxy-v2/ {\
proxy_pass http://127.0.0.1:3803/;\
proxy_http_version 1.1;\
proxy_set_header Host $host;\
proxy_set_header X-Real-IP $remote_addr;\
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;\
proxy_set_header X-Forwarded-Proto $scheme;\
proxy_connect_timeout 10s;\
proxy_read_timeout 30s;\
proxy_send_timeout 30s;\
add_header X-Content-Type-Options nosniff always;\
add_header X-Frame-Options DENY always;\
add_header Cache-Control "no-store, no-cache, must-revalidate" always;\
}' "$NGINX_CONF" || true
fi
echo " ✅ V2 proxy-v2配置已注入"
else
echo " proxy-v2配置已存在"
fi
fi
# 验证并重载Nginx
if nginx -t 2>/dev/null; then
if nginx -s reload 2>/dev/null || systemctl reload nginx 2>/dev/null; then
echo " ✅ Nginx配置验证通过并已重载"
else
echo " ⚠️ Nginx配置有效但重载失败，尝试重启..."
systemctl restart nginx 2>/dev/null || true
fi
else
echo " ⚠️ Nginx配置验证失败:"
nginx -t 2>&1 || true
fi
}
# ── 健康检查 ──────────────────────────────────
health_check() {
echo "检查V2服务状态..."
# Xray
if systemctl is-active --quiet xray 2>/dev/null; then
echo " ✅ Xray: 运行中"
else
echo " ⚠️ Xray: 未运行 (可能还没有用户)"
fi
# 443端口
if ss -tlnp | grep -q ":443 "; then
echo " ✅ 端口443: 监听中"
else
echo " ⚠️ 端口443: 未监听 (添加用户后启动)"
fi
# V2订阅服务
if curl -sf http://127.0.0.1:3803/health >/dev/null 2>&1; then
HEALTH=$(curl -sf http://127.0.0.1:3803/health)
USERS=$(echo "$HEALTH" | grep -o '"users_count":[0-9]*' | cut -d: -f2)
echo " ✅ V2订阅服务: 正常 (${USERS:-0}个用户)"
else
echo " ❌ V2订阅服务: 端口3803无响应"
fi
# V3订阅服务 (如果已部署)
if curl -sf http://127.0.0.1:3805/health >/dev/null 2>&1; then
HEALTH3=$(curl -sf http://127.0.0.1:3805/health)
USERS3=$(echo "$HEALTH3" | grep -o '"users_count":[0-9]*' | cut -d: -f2)
echo " ✅ V3订阅服务: 正常 (${USERS3:-0}个用户) · 光湖语言世界"
else
echo " ⚠️ V3订阅服务: 端口3805无响应 (未部署或未启动)"
fi
# Nginx反向代理
if systemctl is-active --quiet nginx 2>/dev/null; then
if curl -sf http://127.0.0.1:80/api/proxy-v2/health >/dev/null 2>&1; then
echo " ✅ Nginx反代: 正常 (/api/proxy-v2/ → 3803)"
else
echo " ⚠️ Nginx反代: /api/proxy-v2/ 无法访问 (检查proxy_pass端口)"
fi
else
echo " ⚠️ Nginx: 未运行"
fi
# PM2
pm2 list 2>/dev/null || echo " ⚠️ PM2: 未配置"
# 用户列表
echo ""
echo " ═══ 用户列表 ═══"
node "$PROXY_DIR/service/user-manager.js" list 2>/dev/null || echo " (无用户)"
# 云防火墙提醒
echo ""
echo " ═══ 云防火墙提醒 ═══"
echo " ⚠️ 大脑服务器腾讯云控制台防火墙需开放:"
echo " TCP 443 端口 允许所有来源 (0.0.0.0/0) ← VPN入口"
echo " TCP 22 端口 允许所有来源 ← SSH管理"
}
# ── update: 更新代码 ──────────────────────────
update() {
echo "更新V2代理服务..."
deploy_services
ensure_xray_root_user
mkdir -p "$PROXY_DIR/logs"
chmod 755 "$PROXY_DIR/logs"
# 重建Xray配置（根据当前用户列表）
node "$PROXY_DIR/service/user-manager.js" rebuild 2>/dev/null || true
systemctl restart xray 2>/dev/null || true
# 确保UFW开放443
if command -v ufw &>/dev/null; then
ufw allow 443/tcp comment "Xray VLESS+Reality V2" 2>/dev/null || true
fi
# 修复/更新Nginx反向代理配置
configure_nginx
start_pm2_services
health_check
echo "✅ V2更新完成"
}
# ── restart: 重启 ─────────────────────────────
restart() {
echo "重启V2代理服务..."
systemctl restart xray 2>/dev/null || true
start_pm2_services
sleep 3
health_check
}
# ── add-user: 添加用户 ────────────────────────
add_user() {
EMAIL="${2:-}"
QUOTA="${3:-500}"
if [ -z "$EMAIL" ]; then
echo "用法: bash deploy-brain-proxy.sh add-user <email> [quota_gb]"
exit 1
fi
node "$PROXY_DIR/service/user-manager.js" add "$EMAIL" "$QUOTA"
}
# ── remove-user: 移除用户 ─────────────────────
remove_user() {
EMAIL="${2:-}"
if [ -z "$EMAIL" ]; then
echo "用法: bash deploy-brain-proxy.sh remove-user <email>"
exit 1
fi
node "$PROXY_DIR/service/user-manager.js" remove "$EMAIL"
}
# ── list-users: 列出用户 ──────────────────────
list_users() {
node "$PROXY_DIR/service/user-manager.js" list
}
# ── V3 Nginx配置辅助函数 ──────────────────────
# 安全注入V3 location块到nginx配置
# 仅在最后一个顶层 } 之前插入（主server块的结束位置）
# 避免旧 sed '/^}/i\' 模式在多server块配置中重复注入的问题
inject_v3_nginx_block() {
local conf="$1"
if grep -q "proxy-v3" "$conf" 2>/dev/null; then
return 0 # 已存在
fi
local last_brace
last_brace=$(grep -n '^}' "$conf" | tail -1 | cut -d: -f1)
if [ -z "$last_brace" ] || [ "$last_brace" -le 1 ]; then
echo " ❌ 未找到有效的server块结束位置"
return 1
fi
{
head -n $((last_brace - 1)) "$conf"
cat <<'V3BLOCK'
# ─── 光湖语言世界V3 (端口 3805) ───
location /api/proxy-v3/ {
proxy_pass http://127.0.0.1:3805/;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_connect_timeout 10s;
proxy_read_timeout 30s;
proxy_send_timeout 30s;
add_header X-Content-Type-Options nosniff always;
add_header X-Frame-Options DENY always;
add_header Cache-Control "no-store, no-cache, must-revalidate" always;
}
V3BLOCK
tail -n +${last_brace} "$conf"
} > "${conf}.v3-tmp"
if [ -s "${conf}.v3-tmp" ]; then
mv "${conf}.v3-tmp" "$conf"
return 0
else
rm -f "${conf}.v3-tmp"
echo " ❌ V3注入生成文件为空"
return 1
fi
}
# 移除所有V3 location块（用于修复错误注入）
remove_v3_nginx_blocks() {
local conf="$1"
# 删除从V3注释行到该location块闭合}的所有内容
sed -i '/# ─── 光湖语言世界V3/,/^[[:space:]]*}/d' "$conf"
# 清理连续空行（保留最多一个空行）
sed -i '/^$/N;/^\n$/D' "$conf"
}
# 清理 sites-enabled/ 中残留的备份文件
# nginx 会加载 sites-enabled/ 中的所有文件，备份文件中的 default_server 会导致冲突
clean_stale_nginx_backups() {
local stale_count=0
for stale in /etc/nginx/sites-enabled/*.v2-backup \
/etc/nginx/sites-enabled/*.pre-repair \
/etc/nginx/sites-enabled/*.v3-tmp; do
if [ -f "$stale" ]; then
echo " 🧹 清理残留备份: $stale"
rm -f "$stale"
stale_count=$((stale_count + 1))
fi
done
if [ "$stale_count" -gt 0 ]; then
echo " ✅ 已清理 $stale_count 个残留备份文件"
fi
}
# 验证nginx配置并返回错误信息
validate_nginx() {
local result
result=$(nginx -t 2>&1)
if echo "$result" | grep -q "successful"; then
return 0
else
echo "$result" | grep -E 'emerg|error' | head -5
return 1
fi
}
# ── deploy-v3: 部署V3生产环境 ──────────────────
# V2继续运行·V3独立启动·/api/proxy-v3/
deploy_v3() {
echo "部署V3生产环境 (V2继续可用)..."
deploy_services
# 注入SMTP凭据到.env.keys (如果环境变量中有且.env.keys中没有)
inject_smtp_credentials
# 清理 sites-enabled/ 中残留的备份文件（防止 duplicate default_server）
clean_stale_nginx_backups
# 加载密钥作为环境变量
if [ -f "$PROXY_DIR/.env.keys" ]; then
set -a
# shellcheck source=/dev/null
source "$PROXY_DIR/.env.keys"
set +a
fi
# 启动V3 PM2进程
cd "$PROXY_DIR" || { echo "❌ 无法进入 $PROXY_DIR"; return 1; }
pm2 startOrRestart ecosystem.brain-proxy-v3.config.js --update-env
pm2 save
# 添加V3 Nginx路径
NGINX_CONF=""
for candidate in /etc/nginx/sites-enabled/zhuyuan-brain.conf /etc/nginx/sites-enabled/default; do
if [ -f "$candidate" ]; then
NGINX_CONF="$candidate"
break
fi
done
if [ -n "$NGINX_CONF" ]; then
if ! grep -q "proxy-v3" "$NGINX_CONF" 2>/dev/null; then
echo " 添加V3路径..."
if inject_v3_nginx_block "$NGINX_CONF"; then
echo " ✅ V3路径已添加"
else
echo " ❌ V3路径注入失败"
fi
else
echo " proxy-v3配置已存在"
fi
if validate_nginx; then
nginx -s reload 2>/dev/null || systemctl reload nginx 2>/dev/null || true
echo " ✅ Nginx已重载"
else
echo " ❌ Nginx配置验证失败，V3 PM2进程已启动但Nginx未更新"
echo " 请手动检查: nginx -t"
fi
else
echo " ⚠️ 未找到Nginx配置文件，跳过V3路径注入"
fi
echo ""
echo "════════════════════════════════════════"
echo "✅ V3生产环境已就绪"
echo ""
echo "访问方法:"
echo " V3订阅: https://域名/api/proxy-v3/sub/{token}"
echo " V3仪表盘: https://域名/api/proxy-v3/dashboard/{token}"
echo " V3健康: https://域名/api/proxy-v3/health"
echo ""
echo "V2继续运行在 /api/proxy-v2/ (端口3803)"
echo "V3运行在 /api/proxy-v3/ (端口3805)"
echo ""
echo "切换V2用户到V3: bash deploy-brain-proxy.sh switch-v3"
echo "升级到∞版本: bash deploy-brain-proxy.sh deploy-infinity"
echo "════════════════════════════════════════"
# V3健康检查
sleep 2
if curl -sf http://127.0.0.1:3805/health >/dev/null 2>&1; then
HEALTH=$(curl -sf http://127.0.0.1:3805/health)
echo " ✅ V3订阅服务: 正常"
echo " $HEALTH"
else
echo " ⚠️ V3订阅服务(3805)尚未就绪，请稍等几秒后检查"
fi
}
# ── switch-v3: 切换V2→V3 ──────────────────────
# 用户刷新订阅即获取V3配置
switch_v3() {
echo "切换 /api/proxy-v2/ → V3 (端口3805)..."
NGINX_CONF=""
for candidate in /etc/nginx/sites-enabled/zhuyuan-brain.conf /etc/nginx/sites-enabled/default; do
if [ -f "$candidate" ]; then
NGINX_CONF="$candidate"
break
fi
done
if [ -z "$NGINX_CONF" ]; then
echo "❌ 未找到Nginx配置文件"
exit 1
fi
# 清理 sites-enabled/ 中残留的备份文件（nginx会加载该目录所有文件，导致duplicate default_server）
clean_stale_nginx_backups
# 确保备份目录存在（备份存放在 sites-enabled 外部）
mkdir -p "$NGINX_BACKUP_DIR" || { echo "❌ 无法创建备份目录: $NGINX_BACKUP_DIR"; exit 1; }
local CONF_BASENAME
CONF_BASENAME="$(basename "$NGINX_CONF")"
# 验证V3服务是否运行
if ! curl -sf http://127.0.0.1:3805/health >/dev/null 2>&1; then
echo "❌ V3服务(3805)未运行！请先执行 deploy-v3"
exit 1
fi
# 预检查: 验证当前Nginx配置是否有效
if ! validate_nginx; then
echo " ⚠️ 当前Nginx配置存在问题，尝试自动修复..."
# 如果V3注入导致的问题（旧sed '/^}/i'在多server块配置中重复注入）
if grep -q "光湖语言世界V3" "$NGINX_CONF" 2>/dev/null; then
echo " 🔧 修复V3 location块注入错误..."
cp "$NGINX_CONF" "${NGINX_BACKUP_DIR}/${CONF_BASENAME}.pre-repair"
remove_v3_nginx_blocks "$NGINX_CONF"
inject_v3_nginx_block "$NGINX_CONF"
if validate_nginx; then
echo " ✅ V3注入已修复"
nginx -s reload 2>/dev/null || systemctl reload nginx 2>/dev/null || true
else
echo " ❌ 自动修复失败，恢复原配置"
cp "${NGINX_BACKUP_DIR}/${CONF_BASENAME}.pre-repair" "$NGINX_CONF"
exit 1
fi
else
echo " ❌ Nginx配置错误非V3相关，请手动检查: nginx -t"
exit 1
fi
fi
# 备份当前（已验证有效的）Nginx配置（存到 sites-enabled 外部）
cp "$NGINX_CONF" "${NGINX_BACKUP_DIR}/${CONF_BASENAME}.v2-backup"
echo " ✅ 已备份Nginx配置到 ${NGINX_BACKUP_DIR}/${CONF_BASENAME}.v2-backup"
# 将 /api/proxy-v2/ 的 proxy_pass 从 3803 改为 3805
if grep -q "127\.0\.0\.1:3803" "$NGINX_CONF" 2>/dev/null; then
sed -i 's|127\.0\.0\.1:3803|127.0.0.1:3805|g' "$NGINX_CONF"
echo " ✅ /api/proxy-v2/ 已切换到V3 (3803→3805)"
else
echo " ⚠️ 未找到3803端口配置，可能已切换"
fi
# 重载Nginx
if validate_nginx; then
nginx -s reload 2>/dev/null || systemctl reload nginx 2>/dev/null || true
echo " ✅ Nginx已重载"
else
echo " ❌ Nginx配置验证失败，回滚..."
cp "${NGINX_BACKUP_DIR}/${CONF_BASENAME}.v2-backup" "$NGINX_CONF"
nginx -s reload 2>/dev/null || systemctl reload nginx 2>/dev/null || true
echo " ✅ 已回滚到V2配置"
exit 1
fi
echo ""
echo "════════════════════════════════════════"
echo "✅ V2→V3 切换完成!"
echo ""
echo "现在 /api/proxy-v2/sub/{token} 指向V3 (端口3805)"
echo "用户刷新订阅即可获取「光湖语言世界」配置"
echo ""
echo "回滚方法 (如有问题):"
echo " cp ${NGINX_BACKUP_DIR}/${CONF_BASENAME}.v2-backup $NGINX_CONF"
echo " nginx -s reload"
echo "════════════════════════════════════════"
}
# ── deploy-infinity: 部署∞版本 ─────────────────
# 在V3基础上启动自主进化引擎和协议镜像引擎
deploy_infinity() {
echo "部署 ∞ 版本 (在V3基础上添加自主进化能力)..."
deploy_services
# 注入SMTP凭据到.env.keys (如果环境变量中有且.env.keys中没有)
inject_smtp_credentials
# 确保V3进程已在运行
if ! pm2 list 2>/dev/null | grep -q "zy-proxy-v3-sub"; then
echo " ⚠️ V3进程未运行，先部署V3..."
deploy_v3
fi
# 加载密钥作为环境变量
if [ -f "$PROXY_DIR/.env.keys" ]; then
set -a
# shellcheck source=/dev/null
source "$PROXY_DIR/.env.keys"
set +a
fi
# 复制 ∞ 版本新增文件
echo " 复制∞版本模块..."
for f in auto-evolution.js email-hub.js protocol-mirror.js; do
if [ -f "$REPO_PROXY_DIR/service/$f" ]; then
cp "$REPO_PROXY_DIR/service/$f" "$PROXY_DIR/service/$f"
echo " ✅ $f"
else
echo " ⚠️ $f 不存在于仓库"
fi
done
# 复制更新后的PM2配置
cp "$REPO_PROXY_DIR/ecosystem.brain-proxy-v3.config.js" "$PROXY_DIR/ecosystem.brain-proxy-v3.config.js"
# 创建进化报告目录
mkdir -p "$PROXY_DIR/data/evolution-reports"
# 重启所有V3+∞进程 (PM2会根据新配置启动新增进程)
cd "$PROXY_DIR" || { echo "❌ 无法进入 $PROXY_DIR"; return 1; }
pm2 startOrRestart ecosystem.brain-proxy-v3.config.js --update-env
pm2 save
echo ""
echo "════════════════════════════════════════"
echo "♾️ ∞ 版本部署完成!"
echo ""
echo "新增进程:"
echo " zy-auto-evolution — 自主进化引擎 (调度中枢)"
echo " zy-protocol-mirror — 协议镜像引擎 (Xray自动更新)"
echo ""
echo "定时任务:"
echo " 每30分钟 — 协议版本检查"
echo " 每月1号 — 月度进化 + 流量重置邮件"
echo " 流量70% — 全用户预警邮件"
echo ""
echo "PM2进程列表:"
pm2 list 2>/dev/null || true
echo "════════════════════════════════════════"
# 健康检查
sleep 2
echo ""
echo "∞ 版本健康检查:"
for proc in zy-proxy-v3-sub zy-proxy-guardian zy-reverse-boost zy-auto-evolution zy-protocol-mirror; do
if pm2 show "$proc" 2>/dev/null | grep -q "online"; then
echo " ✅ $proc: 在线"
else
echo " ⚠️ $proc: 未就绪 (等待启动)"
fi
done
}
# ── 执行 ──────────────────────────────────────
case "$ACTION" in
install) install ;;
update) update ;;
status) health_check ;;
restart) restart ;;
add-user) add_user "$@" ;;
remove-user) remove_user "$@" ;;
list-users) list_users ;;
deploy-v3) deploy_v3 ;;
switch-v3) switch_v3 ;;
deploy-infinity) deploy_infinity ;;
*)
echo "用法: bash deploy-brain-proxy.sh {install|update|status|restart|add-user|remove-user|list-users|deploy-v3|switch-v3|deploy-infinity}"
exit 1
;;
esac
Reference in New Issue Copy Permalink